11/9/2017 | 1 MINUTE READ

I, Robot

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

Not everything that comes out of the [San Francisco] Bay Area that’s associated with the auto industry has to do with some form of autonomous driving technology, even though it most certainly seems that way.

Share

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

Not everything that comes out of the [San Francisco] Bay Area that’s associated with the auto industry has to do with some form of autonomous driving technology, even though it most certainly seems that way.

Case in point: the partnership developed between Ford and Ekso Bionics of Richmond, California, a company that makes exoskeletons that can be worn by workers to facilitate their production activity.

Specifically, Ford is piloting, in two U.S. plants, the use of what’s called the “EksoVest,” a wearable device that helps support a worker’s arms while performing overhead tasks.

Exoskeleton Technology Pilot

The vest weighs 9.5 pounds and can be fitted to workers who range in height from five feet to six feet, four inches.

The unit provides adjustable lift assistance ranging from five to 15 pounds per arm, thereby helping reduce stress and strain on the operator’s body

The device is not electrical, so there are no batteries, no cords. It provides a mechanical assist to the worker.

Given that the ergonomists at Ford have calculated that average number of times that some workers at assembly plants lift their arms above their heads for work is 4,600 times per day, presumably this upper body exoskeletal tool can be a major benefit to the health and wellbeing of the auto workers who are fitted with it.

Exoskeleton Technology Pilot

It is worth noting that Ford has been working to reduce fatigue and injury in its plants. According to the company, between 2005 and 2016 there was an 83 percent decrease in the number of incidents that resulted in days away, work restrictions or job transfers. The number is 1.55 incidents per 100 full-time North American employees.

Bruce Hettle, Ford group vice president, Manufacturing and Labor Affairs, points out, “Investing in the latest ergonomics research, assembly improvements and lift-assist technologies has helped us design efficient and safe assembly lines, while maintaining high vehicle quality for our customers.”

Let’s face it: by making assembly line workers’ jobs better, better cars and trucks can be produced.

Hand holding a crystal ball

We’d rather send you $15 than rely on our crystal ball…

It’s Capital Spending Survey season and the manufacturing industry is counting on you to participate! Odds are that you received our 5-minute Metalworking survey from Automotive Design and Production in your mail or email. Fill it out and we’ll email you $15 to exchange for your choice of gift card or charitable donation. Are you in the U.S. and not sure you received the survey? Contact us to access it.

Help us inform the industry and everybody benefits.

RELATED CONTENT

  • Chip Foose: Humble Genius

    Scene 1After speaking at Detroit's Cobo Hall during the North American International Auto Show, Chip Foose seems genuinely taken with the evident adulation of the audience, and takes the time to answer every question and sign autographs.The second oldest child and only male in a family with four kids, Chip Foose was born in Santa Barbara, California, on October 6, 1963.

  • Designing the 2019 Ram 1500

    Ram Truck chief exterior designer Joe Dehner talks about how they’ve developed the all-new pickup. “We’ve been building trucks for over 100 years,” he says. “Best I could come up with is that this is our 15th-generation truck.”  

  • Honda’s Most Powerful U.S. Engine—in a Crate

    Honda is an engine company.