11/8/2017 | 4 MINUTE READ

Solid Edge Brings Divergent Modeling Worlds Together

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

This new software suite allows the development of “beautiful models ready for production.” What more can you ask for?


Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

Related Suppliers

“The dirty little secret” in computer-aided design (CAD), says Dan Staples, Siemens PLM Software vice president of product development, are the “challenges” in making generative design, additive manufacturing (AM) and reverse engineering “a cohesive whole.” The problem revolves around faceted (mesh) versus B-rep (feature-based) models, and that never the twain shall meet—without some modern-day technology.

That technology, within the latest version of Solid Edge, nicknamed “ST10,” from Siemens PLM (plm.automation.siemens.com/en/products/solid-edge/st10/), is called “convergent modeling.” This “secret sauce,” a form of hybrid modeling, lets designers and engineers use mesh models as if they were B-rep models. That, along with Siemens PLM synchronous technology, which combines direct modeling with parametric design, makes ST10 a modern-day design tool.

Introducing convergent modeling
Generative modeling lets designers create interesting designs. These designs are connected together into a mesh. Reverse engineering lets users scan objects and get a series or cloud of points. Algorithms turn those points into a triangulated mesh. AM has been based on triangulated meshes since its introduction.

Because these three operations use mesh-based geometries, a problem exists: Most design engineers work in CAD systems that create boundary representation (B-rep) models, which are feature-based solid models. B-rep, explains Staples, uses cylinders, planes, cones and other objects to create a design. Faceted modeling doesn’t; its designs use a mesh. 

Given modeling realities, producing a great generative design or a part design from reverse engineering becomes less than “seamless” when it’s time to modify the design—using a CAD system based on B-reps. Conversely, continues Staples, converting 3D scans to final designs is not hard, but people can spend days surfacing those designs. Unless they’re using B-rep CAD.

Convergent modeling solves all that by combining B-rep solids and facet models together. Explains Staples, “You can have B-rep data or mesh-based data. The data can co-exist. You can do Boolean operations between them. You can do feature-based modeling on the mesh models. The user interaction is so seamless, you might think you’re working on a b-rep model when in fact you’re not.” 

In generative design, says Staples, engineers typically get “a really cruddy looking thing. It tells you where to put material; then you have to do all the work modeling the part.” With ST10, engineers can create organically shaped “beautiful models ready for production” by essentially performing feature-based modeling on mesh-based parts. On the other hand, when applying generative design techniques in traditional reverse engineering, users have to take the scanned model into a B-rep model. ST10 eliminates having to choose what CAD method to use. Users, says Staples, “can do all sorts of feature-based model directly on that data.”

Users can also extract surfaces from mesh data into planar or cylindrical surfaces (i.e., B-rep models). With synchronous technology, users can work directly on the surfaces of 3D scanned mesh geometries natively, thereby eliminating the need—and time, energy and money—for reverse-modeling.

Put together as it is in ST10—direct, facet and parametric modeling—there’s “no time-consuming, error-prone conversions. You don't have to spend days reverse-modeling over mesh data. And if you already have an awesome ready-to-print model, you can still add/subtract features,” explains Staples. Plus, says John Fox, Siemens PLM vice president of marketing, ST10 replaces a number of legacy tools for importing, exporting and modifying generative designs, scanned models, or performing topology optimization, thereby eliminating several large bottlenecks.

The best of the rest
ST10 has several other new features. It includes a new, fully embedded computational fluid dynamics (CFD) simulation and analysis tool for investigating fluid flows and heat transfers. Also, “If you’re a Solid Edge customer, you get Catchbook in the main package,” explains Fox. This way, a designer can sketch a drawing in any mobile device, export that drawing to ST10, then go from there.

On the computer-aided manufacturing (CAM) side, Solid Edge CAM (formerly CAM Express) now includes Siemens’s own adaptive milling algorithms, which generate CNC-based cutting programs to increase tool life by using more of a tool’s flute length. Post processing, usually a costly and time-consuming process, is aided by PostHub, a cloud-based interface to access post processors. Users can filter the available post processors by machine or by mill writer (if somebody good at writing post processors for a particular machine is known). Users can see several try-before-you-buy post processors, as well as post processors provided by Siemens for free.

ST10 introduces Siemens PLM’s entry into technical publications and interactive technical documentation. Solid Edge Illustrations (formerly QuadriSpace Publisher3D) creates detailed illustrations, such as exploding views, and publishes those to webpages—directly from Solid Edge geometry, and product and manufacturing (PMI) annotations. Solid Edge Documentation (formerly QuadriSpace Pages3D) is a more comprehensive product for creating customizable, multi-page documents, such as work instructions, interactive part catalogs, product manuals and “a lot more than you can do with your standard word processor,” says Oliver Duncan, product manager of Solid Edge Design Products.

ST10 includes built-in data management functionality, such as filtering for new or newly available parts in assemblies, enhanced revision management, access to component revision histories and associated drawings, automatic document numbering and replacing obsoleted components, full text search in drawings, and duplicate file detection. Design Manager is basically a hub for performing data management housekeeping tasks. In it, users can move, rename, revise data, find data duplicates and other tasks.

All that’s in ST10 lends credence to something Fox says: “Conceptually, manufacturing, data management, design and tech pubs are all part of the portfolio. Solid Edge is CAD, yes, but it’s really a product development portfolio tool.” 

Hand holding a crystal ball

We’d rather send you $15 than rely on our crystal ball…

It’s Capital Spending Survey season and the manufacturing industry is counting on you to participate! Odds are that you received our 5-minute Metalworking survey from Automotive Design and Production in your mail or email. Fill it out and we’ll email you $15 to exchange for your choice of gift card or charitable donation. Are you in the U.S. and not sure you received the survey? Contact us to access it.

Help us inform the industry and everybody benefits.


  • What you see in PRODUCT VISUALIZATION is what you get

    Visualization is an affordable technology for quickly and realistically depicting data visually. Besides being great for marketing, visualization saves prototyping time and expense, and it lets users see physical conditions not obvious in 2D or 2 1/2 D.

  • Building An Ambulance

    Ambulance manufacturing is as much about design, engineering and technology as it is durability and functionality.

  • Topology Optimization Explained

    Topology optimization cuts part development time and costs, material consumption, and product weight. And it works with additive, subtractive, and all other types of manufacturing processes, too.