2/10/2011 | 1 MINUTE READ

Laser Hardening Made Efficient

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

A system for laser hardening drawing punches and other forming tools was developed for a major German automotive manufacturer by CENIT AG (cenit.de), a consultancy with specialization in software.

Share

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

A system for laser hardening drawing punches and other forming tools was developed for a major German automotive manufacturer by CENIT AG (cenit.de), a consultancy with specialization in software. According to Dr. Andreas Kach, the challenges are assuring that the rectangular laser beam is aligned along any contours, that an area that has been hardened is not covered again, and that there is no prolonged dwelling of the beam in any one area.

The system developed for the task is based on a six-axis portal laser system, a PEDILAS from Schuler Group (schulergroup.com), and a 840D controller from Siemens PLM Software (siemens.com). Because there was no standard product for offline programming the components, CENIT developed a system, utilizing its FASTTRIM off-line programming system that is readily integrated with the CATIA V5 system (3DS.com) used by the automaker.

The toolpaths for hardening were generated utilizing parameters including the effective area of the laser and the safety margin between adjacent guide paths. While much of the programming is done automatically, there is manual functionality for making corrections or adjustments. To assure that the hardening is done as efficiently as possible, a look-ahead function determines what compensations will need to be made to the axes to accommodate features, thereby minimizing the required adjustments for faster processing.

RELATED CONTENT

  • The Corvette Goes Aluminum

    For the high-performance Corvette Z06 GM defied tradition and switched from a steel to an aluminum frame.

  • Lotus Bonds with Aluminum

    If aluminum-intensive cars are ever to become more than an occasional curiosity, automakers may have to give up their weld shops.

  • When Painting Two-Tones: Bag It

    Great material savings can be achieved when high temperature-resistant bags are used for reverse masking in paint shops for getting two-tone paint jobs done. Here's how it is done.