Dodge Launches Challenger SRT Hellcat Redeye

“It’s a Hellcat possessed by a Demon,” Steve Beahm says quite simply.

“It’s a Hellcat possessed by a Demon,” Steve Beahm says quite simply. And no, he’s not talking about something related to a Stephen King book. Beahm, the Head of Passenger Cars for Dodge, Dodge SRT, Chrysler and, and Fiat, is referring to the 2019 Dodge Challenger SRT Hellcat Redeye.

FCA Head of Passenger Car Brands Steve Beahm, Dodge, SRT, Chrysler and Fiat, unveiled the new 2019 Dodge Challenger SRT Hellcat Redeye (right) and the 2019 Dodge Charger SRT Hellcat Widebody (left) at the Chrysler Proving Grounds in Chelsea, Mich., today.  Featuring a Hellcat 797-horsepower supercharged HEMIĀ® high-output engine, Challenger Hellcat Redeye joins the most powerful SRT Hellcat lineup ever.

Beahm and the Dodge Challenger SRT Hellcat Redeye

The SRT Hellcat is the 707-hp version of Challenger. The SRT Demon has a frightening 840 hp. So the SRT Hellcat Redeye is, perhaps, “just right” (although this Goldilocks would be somewhat out of the ordinary) as it has a supercharged (the largest supercharger, SRT says, of any production car, at 2.7 liters) 6.2-liter HEMI high output V8 that’s rated at 797 hp and 707 lb-ft of torque. As Beahm explains, it is the Demon engine with a different calibration.

Here’s a fun fact about the Hellcat Redeye that will cause those who are concerned about fuel economy to have their eyes pop right out of their sockets:

There are two dual-stage fuel pumps deployed. At full throttle that HEMI consumes 1.43 gallons of fuel per minute, which means that the fuel tank would be drained in under 11 minutes (assuming that you could keep the pedal to the proverbial metal for 11 minutes: it has a ¼-mile time of 11.1 seconds (at 131 mph); it has a top speed of 203 mph.

SRT Hellcat Redeye emblem located on the cover of the Supercharged 6.2L HEMIĀ® V-8 engine

If the car is driven “normally” it is said to get 22 mpg.

There were a few other modifications that were made to the vehicle to allow it to do what it does, like deploying high-strength steel prop shafts (which provide a 15 percent increase in torque capacity) and using 41-spline half shafts (which provide a 20 percent increase in torque capacity).

The engine, incidentally, is mated to a TorqueFlite 8HP90 eight-speed automatic.

One thing the engine needs lots of (in addition to fuel) is air. So there is a fully functional dual-snorkel hood that provides maximum air intake, a driver-side air-catcher headlamp, and an inlet near the wheel liner.

One thing the driver is going to need after some time behind the wheel: the ability to catch her or his breath.