9/5/2017 | 1 MINUTE READ

Automotive Past and Future and Lots In Between

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

The Nissan Pao is a small three-door—approximately 147 inches long, 62 inches wide, 58 inches high, and with a 91-inch wheelbase—that had a three year run, from 1989 to 1991.

Share

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

The Nissan Pao is a small three-door—approximately 147 inches long, 62 inches wide, 58 inches high, and with a 91-inch wheelbase—that had a three year run, from 1989 to 1991. The Pao features a three-speed automatic or a five-speed manual, both of which are fitted to a 52-hp 1-liter four. The Pao was designed by Naoki Sakai, who worked at camera-maker Olympus, and went to Toyota following his stint on what were known as “Pike” cars, vehicles (also including the Figaro, Be-1, and S-Cargo), as they were developed by a Nissan special projects group at the Pike Factory.

NissanPao

Pao

Image source: https://www.flickr.com/photos/63416089@N06/7790385062/in/photostream/ 

At this point you may be wondering why the history lesson about a car that you’ve probably not seen.

It’s because it so happens that Chris Paukert of Roadshow by CNET owns an ’89 Pao and brought it to the studio for the latest edition of “Autoline After Hours.”

In addition, Joe White of Reuters joins Autoline’s John McElroy and me, and the four of us have a discussion of a variety of automotive subjects, ranging from how well people will accept autonomous vehicles and whether things like the Domino’s Pizza/Ford delivery vehicles might help to the potential consequences of Hurricane Harvey on post-recovery auto sales in Texas (as the hurricane-affected area accounts for approximately four percent of all vehicle sales in the U.S).

Cummins

We talk about why there are so many announcements of electric vehicle production in China and whether Cummins is serious about its Concept Class 7 Urban Hauler EV (that’s right: an electric class 7 semi tractor).

And you can see it here:


RELATED CONTENT

  • Injection molding for interiors—including fabrics

    Plenty of interior components are injection molded. But some companies—such as VW—are using a process for trim pieces that both mold a component and cover it in fabric in a single molding process. And it is coming to the U.S. in the not-too-distant future.

  • Pacifica Hybrid Explained

    Chrysler pioneered the modern-day minivan more than 30 years ago and has been refining and improving that type of vehicle ever since.

  • Designing the 2019 Ram 1500

    Ram Truck chief exterior designer Joe Dehner talks about how they’ve developed the all-new pickup. “We’ve been building trucks for over 100 years,” he says. “Best I could come up with is that this is our 15th-generation truck.”  

Resources